How to Photograph Fireworks: Bulb Mode and Exposure Time

Two New Year’s Eve photographs over Gliwice share the same settings of 92 mm, f/8 and ISO 200. One exposure lasted 6.3 seconds; the other lasted 33. In the shorter frame two bursts have their own space in the sky. In the longer one golden trails from successive bursts overlap. The moment you close the shutter is a compositional choice.

Frame the scene before the sky lights up

Set up a tripod with a clear view above the roofs. Include a strip of buildings below and space for the highest trails above. Use the first burst to judge the framing. If you keep clipping the tips, widen the view. Here the dark aerials and roofs give the trails a sense of height even where most of the city falls into shadow.

Tall silver and red firework trails above dark rooftops and aerials
A tight view includes both the high trails and the roofline. Canon EOS 6D · 105 mm · f/8 · 12 s · ISO 200.

Before the display, focus on a distinct edge of a distant building. Magnify the preview, check sharpness and switch to manual focus. Check again after zooming. A cable release or remote keeps the camera steady when opening and closing the shutter.

Bulb mode and the first burst

Start in manual mode with RAW, ISO 100, f/8 and a few seconds to judge the brightness of the trails. To end the exposure just as the last sparks complete an arc, use Bulb. Open the shutter just before the burst, watch the trails spread and close it when the shape you want is complete.

A red-and-white firework with a smaller burst to the right
The large red-and-white burst and its smaller neighbour on the right can be read separately. Canon EOS 6D · 92 mm · f/8 · 6.3 s · ISO 200.

Several bursts in one exposure

Compare the shorter exposure with the photograph below. Over 33 seconds the camera recorded successive bursts in one frame, with more intersecting arcs. These were different moments in the display: the number, colour and position of the bursts also contribute to the difference.

Overlapping golden and white bursts above silhouetted roofs
Gold and white arcs from several bursts fill the sky above the roofs. Canon EOS 6D · 92 mm · f/8 · 33 s · ISO 200.

During a quiet passage you can wait for a burst in an empty area. During the finale, close the shutter sooner if trails keep crossing the same spot. A single spark exposes a given point only while it shines there; city lights, later sparks and illuminated smoke continue to register throughout the exposure.

Keep colour in the sparks

Magnify the brightest burst. If its centre is white but the trails retain colour, decide whether that small spot matters. If broad bands lose colour in a single burst, try f/11 instead of f/8 to cut the light by one stop. The example below shows the red and gold arcs at f/11.

Gold and red sparks curving through smoke above rooftops
Red and gold sparks stand out against illuminated smoke. Canon EOS 6D · 92 mm · f/11 · 9 s · ISO 200.

When an ND filter helps

Make your first series without a filter. If you want a long exposure for several bursts but lit buildings are too bright at your chosen aperture and low ISO, try a neutral-density filter. A one-stop ND halves the light reaching the sensor. It also dims fine coloured trails. Compare the bright windows and the faintest ends of the arcs before choosing a stronger filter.

What to check in Lightroom Classic

Start with the brightest trails and the RGB histogram. Lower Highlights and see whether a transition from white to colour returns. Where every channel clipped, the slider can only darken the patch. Use a familiar feature in the city as a white-balance reference. Sampling a coloured spark as neutral can remove the very hue you want to keep.

Finally compare the thumbnails. Pick one with a clearly outlined burst and another where overlapping arcs form an interesting pattern. Explore fireworks over Gliwice, see how shutter speed changes motion, or browse the Adobe Stock collection.