How to Photograph Architecture: Wide Angles, Verticals and Perspective

From the terrace of Warsaw’s Palace of Culture and Science you can see the roofs of low buildings as well as the façades of skyscrapers. All four photographs in this guide were taken at 24 mm. One shows the whole city; another isolates a single tower. The choice begins with where you stand.

Choose your viewpoint first

For a panorama, pick the building where you want the eye to rest. Move along the terrace and watch whether its roof stands out against the sky or disappears into another façade. Crossing a square can achieve the same thing at street level. Once the buildings sit well together, choose the focal length and frame edges.

Warsaw under a cloudy sky from the Palace of Culture and Science terrace
From the Palace terrace, the high viewpoint reveals the pattern of development all the way to the horizon. Canon EOS 6D · 24 mm · f/11 · 1/200 s · ISO 100.

Working between 14 and 35 mm

In a narrow street, 14 mm can fit both the base and roof into the frame. Check the corners: a nearby lamp post or car may occupy more space than you expected. At 35 mm it is easier to select part of a row of buildings. If you can step back, compare the proportions of nearby objects against the façade from your new position.

A tall glass tower against the Warsaw skyline and blue sky
The glass tower is the subject; the buildings beyond give it scale. Canon EOS 6D · 24 mm · f/11 · 1/250 s · ISO 100.

Keep verticals and proportions under control

Switch on the viewfinder grid. Level the camera from side to side, then check its upward or downward tilt. Pointing up from street level makes vertical edges converge towards the top; looking down from a terrace can make them converge towards the bottom. For parallel verticals, try holding the camera level and framing vertically. Leave space above the roof and at the sides for cropping.

The curved glass outline of Złota 44 above central Warsaw
Złota 44 in a vertical frame. Judge alignment by a straight mullion between windows. The tower’s curved outline is part of its design. Canon EOS 6D · 24 mm · f/11 · 1/320 s · ISO 200.

The same frame before and after perspective correction

Look at the building cut off by the left edge of the photograph below. Follow its right edge down from the roof. Open the second view and compare the slope of that line and the width of the lower part of the frame.

Two office towers in central Warsaw viewed from above
Before the additional correction, from the Warsaw album. Canon EOS 6D · 24 mm · f/11 · 1/320 s · ISO 200.
Show the example with corrected verticals
The same view with the bottom of the frame widened
This on-page simulation uses the same photograph. The grey area shows the shape after transformation. A rectangular export would trim part of the image at the edges.

Correct perspective in Lightroom Classic

Open the RAW file in Develop. Start with the lens profile under Lens Corrections to address curved lines near the edges. Use Transform for leaning buildings. A virtual copy makes it easy to compare the two versions.

Try Vertical first. If Lightroom picks a diagonal architectural feature as a reference, switch to Guided. Draw two long guides along genuinely vertical edges, one on each side. Avoid cornices receding along the street. Check the window shapes and the tower’s proportions. For small manual adjustments use Vertical; use Rotate to level a tilted horizon.

Enable Constrain Crop and inspect the roof and corners. If an important part of the façade disappears, reduce the correction or return to a looser crop in the RAW file. Compare both the verticals and the amount of surrounding city you retain.

Explore the Warsaw album for more views from this terrace. Try the same viewpoint exercise on a waterfront with the port photography guide. Adobe’s Lightroom Classic guide covers the perspective tools.